CIT Forum Index

Support => Tutorials and Guides => Vehicle Guides => Topic started by: Bully02 on 26 04, 2016, 07:48:52 pm

Title: Drive your vehicle using Joypad.
Post by: Bully02 on 26 04, 2016, 07:48:52 pm
     Hello Community,

I have been asking in few days/weeks if anyone knows how to use Joypad to drive my vehicle... no one replied even some supporters / staffs...
 
So anyway, today im going to show you how to use Joypad to drive your vehicle in very easy way. It helps most of cilivials since they work driving jobs such as Waste Collector - Delivery Man - Bus Driver...

   -Quick introduction:

This introduction is about Joypad's binds if you dont know the binds or commands of joypad's keys, just see this picture.
ClickMe! (http://i.imgur.com/QFUzpZ7.jpg)

   -Steps to start:

   -Bind you should add:
So, after entering "Settings > Binds" you need to add binds that you need, check this screenshot it shows you binds you should add. ClickMe! (http://i.imgur.com/D1lAZg8.png)  ( With red points )
Well, to bind nitrous you need to open console with F8 and type "bind joyX nos_start" otherwise scroll down you will find that bind of "nos_start" and bind it from there.

   -Extra commands to bind:
Well, there are more commands to bind them, I will show you most of them:
You only need to open console and type "bind joyX engine" - "bind joyX pick ID" -"bind joyX recover"

   So like that you are done with preparation and ready to use your Joypad.
If you want to see the current binds that im using click on "Show Content"
Show content
  • Enter/Exit "joy1"
  • Accelerate "joy3"
  • Brake/Reverse "joy2"
  • Handbrake "joy4"
  • Pick ID "joy7"
  • Recover "joy8"
  • Engine "joy5"
  • Horn "joy10"
  • Nos_Start "joy6"

Thanks for reading, I hope you understood. If you have any qestion/addition just reply here.
Title: Re: Drive your vehicle using Joypad.
Post by: Safi on 26 04, 2016, 10:35:29 pm
Show content
     Hello Community,

I have been asking in few days/weeks if anyone knows how to use Joypad to drive my vehicle... no one replied even some supporters / staffs...
 
So anyway, today im going to show you how to use Joypad to drive your vehicle in very easy way. It helps most of cilivials since they work driving jobs such as Waste Collector - Delivery Man - Bus Driver...

   -Quick introduction:

This introduction is about Joypad's binds if you dont know the binds or commands of joypad's keys, just see this picture.
ClickMe! (http://i.imgur.com/QFUzpZ7.jpg)

   -Steps to start:
  • Plug-in your Joypad.
  • Enter your MTA.
  • Connect to CIT server.
  • Click ESC > Settings > Binds.

   -Bind you should add:
So, after entering "Settings > Binds" you need to add binds that you need, check this screenshot it shows you binds you should add. ClickMe! (http://i.imgur.com/D1lAZg8.png)  ( With red points )
  • Enter/Exit
  • Accelerate
  • Brake/Reverse
  • Horn (if you want it ofcourse)
  • Handbrake
Well, to bind nitrous you need to open console with F8 and type "bind joyX nos_start" otherwise scroll down you will find that bind of "nos_start" and bind it from there.

   -Extra commands to bind:
Well, there are more commands to bind them, I will show you most of them:
  • ( Pick - Recover - Engine )
You only need to open console and type "bind joyX engine" - "bind joyX pick ID" -"bind joyX recover"

   So like that you are done with preparation and ready to use your Joypad.
If you want to see the current binds that im using click on "Show Content"
Show content
  • Enter/Exit "joy1"
  • Accelerate "joy3"
  • Brake/Reverse "joy2"
  • Handbrake "joy4"
  • Pick ID "joy7"
  • Recover "joy8"
  • Engine "joy5"
  • Horn "joy10"
  • Nos_Start "joy6"

Thanks for reading, I hope you understood. If you have any qestion/addition just reply here.
But what it's need?
Title: Re: Drive your vehicle using Joypad.
Post by: Bully02 on 26 04, 2016, 11:24:06 pm
Quote from: safi on 26 04, 2016, 10:35:29 pm
Show content
     Hello Community,

I have been asking in few days/weeks if anyone knows how to use Joypad to drive my vehicle... no one replied even some supporters / staffs...
 
So anyway, today im going to show you how to use Joypad to drive your vehicle in very easy way. It helps most of cilivials since they work driving jobs such as Waste Collector - Delivery Man - Bus Driver...

   -Quick introduction:

This introduction is about Joypad's binds if you dont know the binds or commands of joypad's keys, just see this picture.
ClickMe! (http://i.imgur.com/QFUzpZ7.jpg)

   -Steps to start:
  • Plug-in your Joypad.
  • Enter your MTA.
  • Connect to CIT server.
  • Click ESC > Settings > Binds.

   -Bind you should add:
So, after entering "Settings > Binds" you need to add binds that you need, check this screenshot it shows you binds you should add. ClickMe! (http://i.imgur.com/D1lAZg8.png)  ( With red points )
  • Enter/Exit
  • Accelerate
  • Brake/Reverse
  • Horn (if you want it ofcourse)
  • Handbrake
Well, to bind nitrous you need to open console with F8 and type "bind joyX nos_start" otherwise scroll down you will find that bind of "nos_start" and bind it from there.

   -Extra commands to bind:
Well, there are more commands to bind them, I will show you most of them:
  • ( Pick - Recover - Engine )
You only need to open console and type "bind joyX engine" - "bind joyX pick ID" -"bind joyX recover"

   So like that you are done with preparation and ready to use your Joypad.
If you want to see the current binds that im using click on "Show Content"
Show content
  • Enter/Exit "joy1"
  • Accelerate "joy3"
  • Brake/Reverse "joy2"
  • Handbrake "joy4"
  • Pick ID "joy7"
  • Recover "joy8"
  • Engine "joy5"
  • Horn "joy10"
  • Nos_Start "joy6"

Thanks for reading, I hope you understood. If you have any qestion/addition just reply here.
But what it's need?
Using your Joypad to drive vehicles in CIT server.
Title: Re: Drive your vehicle using Joypad.
Post by: Safi on 27 04, 2016, 12:13:55 am
Quote from: Bully02 on 26 04, 2016, 11:24:06 pm
Using your Joypad to drive vehicles in CIT server.
Okay but we can also use kyboard.
Anyway gg (because it can help to hwo like joypad)
Title: Re: Drive your vehicle using Joypad.
Post by: Rexion on 28 04, 2016, 07:02:36 pm
@Bully02 Add this video tutorial:

https://www.youtube.com/watch?v=68MKioSHVgs
Title: Re: Drive your vehicle using Joypad.
Post by: Boles on 28 04, 2016, 07:33:01 pm
https://cit.gg/index.php?topic=217664.msg3249940#msg3249940
Title: Re: Drive your vehicle using Joypad.
Post by: Rexion on 06 05, 2016, 07:17:14 pm
What about this one? This is easier then my previous video.

Show content
https://www.youtube.com/watch?v=bz6tmp0B_q0
Title: Re: Drive your vehicle using Joypad.
Post by: Ugly CJ on 11 10, 2016, 05:37:58 pm
Can I create binds with combinations? Example: /bind joyxy hide

So that way if I press x and y at the same time I will hide my car.

Try to do that and tell us, will be useful.



Thx
Title: Re: Drive your vehicle using Joypad.
Post by: Mr.EgE on 11 10, 2016, 05:43:17 pm
Hello There,
You should watch this video it's another tutorial.

https://www.youtube.com/watch?v=5Rt51OqR0eQ
Title: Re: Drive your vehicle using Joypad.
Post by: 8sianRednek on 17 10, 2016, 09:33:24 pm
Instead of binding for the control axes, just go into 'Controls' tab and bind them axes into the 2 joystick options at the bottom. Left stick is for vehicle, right stick is for camera movement. Also play around with 'Dead zone' and 'Saturation' until you get the sensitivity you like.
Title: Re: Drive your vehicle using Joypad.
Post by: Rexion on 18 10, 2016, 07:37:22 pm
Quote from: Fabrix199 on 11 10, 2016, 05:37:58 pm
Can I create binds with combinations? Example: /bind joyxy hide

So that way if I press x and y at the same time I will hide my car.

Try to do that and tell us, will be useful.



Thx

@Fabrix199 Watch the above video, and I don't think there is any kind of bind like that you are saying about our joy stick setting In-game.
But you can take a wide look at the MTA, bind settings where every single bind is present over there. All the available ones actually.