Support > Vehicle Guides

Drive your vehicle using Joypad.

(1/3) > >>

Bully02:
     Hello Community,

I have been asking in few days/weeks if anyone knows how to use Joypad to drive my vehicle... no one replied even some supporters / staffs...
 
So anyway, today im going to show you how to use Joypad to drive your vehicle in very easy way. It helps most of cilivials since they work driving jobs such as Waste Collector - Delivery Man - Bus Driver...

   -Quick introduction:

This introduction is about Joypad's binds if you dont know the binds or commands of joypad's keys, just see this picture.
ClickMe!

   -Steps to start:

* Plug-in your Joypad.
* Enter your MTA.
* Connect to CIT server.
* Click ESC > Settings > Binds.
   -Bind you should add:
So, after entering "Settings > Binds" you need to add binds that you need, check this screenshot it shows you binds you should add. ClickMe!  ( With red points )

* Enter/Exit
* Accelerate
* Brake/Reverse
* Horn (if you want it ofcourse)
* HandbrakeWell, to bind nitrous you need to open console with F8 and type "bind joyX nos_start" otherwise scroll down you will find that bind of "nos_start" and bind it from there.

   -Extra commands to bind:
Well, there are more commands to bind them, I will show you most of them:

* ( Pick - Recover - Engine )You only need to open console and type "bind joyX engine" - "bind joyX pick ID" -"bind joyX recover"

   So like that you are done with preparation and ready to use your Joypad.
If you want to see the current binds that im using click on "Show Content"
Show content
* Enter/Exit "joy1"
* Accelerate "joy3"
* Brake/Reverse "joy2"
* Handbrake "joy4"
* Pick ID "joy7"
* Recover "joy8"
* Engine "joy5"
* Horn "joy10"
* Nos_Start "joy6"
Thanks for reading, I hope you understood. If you have any qestion/addition just reply here.

Safi:
Show content     Hello Community,

I have been asking in few days/weeks if anyone knows how to use Joypad to drive my vehicle... no one replied even some supporters / staffs...
 
So anyway, today im going to show you how to use Joypad to drive your vehicle in very easy way. It helps most of cilivials since they work driving jobs such as Waste Collector - Delivery Man - Bus Driver...

   -Quick introduction:

This introduction is about Joypad's binds if you dont know the binds or commands of joypad's keys, just see this picture.
ClickMe!

   -Steps to start:

* Plug-in your Joypad.
* Enter your MTA.
* Connect to CIT server.
* Click ESC > Settings > Binds.
   -Bind you should add:
So, after entering "Settings > Binds" you need to add binds that you need, check this screenshot it shows you binds you should add. ClickMe!  ( With red points )

* Enter/Exit
* Accelerate
* Brake/Reverse
* Horn (if you want it ofcourse)
* HandbrakeWell, to bind nitrous you need to open console with F8 and type "bind joyX nos_start" otherwise scroll down you will find that bind of "nos_start" and bind it from there.

   -Extra commands to bind:
Well, there are more commands to bind them, I will show you most of them:

* ( Pick - Recover - Engine )You only need to open console and type "bind joyX engine" - "bind joyX pick ID" -"bind joyX recover"

   So like that you are done with preparation and ready to use your Joypad.
If you want to see the current binds that im using click on "Show Content"
Show content
* Enter/Exit "joy1"
* Accelerate "joy3"
* Brake/Reverse "joy2"
* Handbrake "joy4"
* Pick ID "joy7"
* Recover "joy8"
* Engine "joy5"
* Horn "joy10"
* Nos_Start "joy6"
Thanks for reading, I hope you understood. If you have any qestion/addition just reply here.
But what it's need?

Bully02:

--- Quote from: safi on 26 04, 2016, 10:35:29 pm ---Show content     Hello Community,

I have been asking in few days/weeks if anyone knows how to use Joypad to drive my vehicle... no one replied even some supporters / staffs...
 
So anyway, today im going to show you how to use Joypad to drive your vehicle in very easy way. It helps most of cilivials since they work driving jobs such as Waste Collector - Delivery Man - Bus Driver...

   -Quick introduction:

This introduction is about Joypad's binds if you dont know the binds or commands of joypad's keys, just see this picture.
ClickMe!

   -Steps to start:

* Plug-in your Joypad.
* Enter your MTA.
* Connect to CIT server.
* Click ESC > Settings > Binds.
   -Bind you should add:
So, after entering "Settings > Binds" you need to add binds that you need, check this screenshot it shows you binds you should add. ClickMe!  ( With red points )

* Enter/Exit
* Accelerate
* Brake/Reverse
* Horn (if you want it ofcourse)
* HandbrakeWell, to bind nitrous you need to open console with F8 and type "bind joyX nos_start" otherwise scroll down you will find that bind of "nos_start" and bind it from there.

   -Extra commands to bind:
Well, there are more commands to bind them, I will show you most of them:

* ( Pick - Recover - Engine )You only need to open console and type "bind joyX engine" - "bind joyX pick ID" -"bind joyX recover"

   So like that you are done with preparation and ready to use your Joypad.
If you want to see the current binds that im using click on "Show Content"
Show content
* Enter/Exit "joy1"
* Accelerate "joy3"
* Brake/Reverse "joy2"
* Handbrake "joy4"
* Pick ID "joy7"
* Recover "joy8"
* Engine "joy5"
* Horn "joy10"
* Nos_Start "joy6"
Thanks for reading, I hope you understood. If you have any qestion/addition just reply here.
But what it's need?

--- End quote ---
Using your Joypad to drive vehicles in CIT server.

Safi:

--- Quote from: Bully02 on 26 04, 2016, 11:24:06 pm ---Using your Joypad to drive vehicles in CIT server.

--- End quote ---
Okay but we can also use kyboard.
Anyway gg (because it can help to hwo like joypad)

Rexion:
@Bully02 Add this video tutorial:

Navigation

[0] Message Index

[#] Next page