Support > Job Guides

Civilian: Crane Operator

(1/1)

Sawos:
Crane Operator job guide
Step 1: Location and Introduction

* Head to Easter Basin Harbor in San Fierro.
Show content
* Understand that as a Crane Operator, your role involves moving, lifting, and positioning goods using a crane's electromagnet.Step 2: Crane Selection
there are two cranes available for the job:

* Crane 1 is situated in the South West.
* Crane 2 is located in the North East next to an anchored ship.
Show contentStep 3: Crane 1 Operations
Option A: Crane 1 - Load Mission


* Take on a loading mission assigned to you.
* Lift containers near the warehouse using Crane 1 and place them onto the Big Ship (Freighter).
* Complete the mission by positioning containers in 5 designated zones on the ship.
* Receive payment for each successfully loaded container.Option B: Crane 1 - Unload Mission


* Accept an unloading mission for Crane 1.
* Use Crane 1 to carefully move containers from the Big Ship to specific boxes on the ground.

* Identify the boxes with a truck blip on the radar/map, categorized by Red, Yellow, and Blue colors.Step 4: Crane 2 Operations

Option A: Crane 2 - Load Mission


* Wait until the Cargo Ship is ready and docked in the basin.
* Perform a similar loading task as Crane 1, but now with 7 designated zones on the ship.Option B: Crane 2 - Unload Mission


* Choose the unloading mission for Crane 2 after the Cargo Ship has docked.
* Execute the same unloading process as the Crane 1 unload mission.Step 5: Crane Operating Instructions

* When entering the crane, you'll find a control panel with operating instructions.
Show content
* Remember to use the command "/magnet" if the container remains attached to the ship's magnet after successful loading.
* Keep an eye on the magnet load detector, located on the right side of your screen below the timer. It confirms if a container is ready for delivery.
* Keep an eye on the magnet load detector, located on the right side of your screen below the timer. It confirms if a container is ready for delivery.Step 6: Ground Detection

* Beneath the load detector, find the ground detection indicator.
* Monitor whether the attached container has touched the ground or not.
Job Ranks:
         L0. Crane Trainee
         L1. Trained Operator - Req: 40
         L2. Class C Operator - Req: 100
         L3. Class B Operator - Req: 180
         L4. Class A Operator - Req: 250
         L5. Specialized Heavy Lifter - Req: 360
         L6. Crane Foreman - Req: 500
         L7. Slinger - Req: 800
         L8. Supervisor - Req: 1000
         L9. Site Manager - Req: 2000
         L10. The Crane - Req: 5000
Q: Are there commands to customize job settings?
A: Absolutely. There are commands available to modify certain settings for the Crane Operator job:

* /crane or "enter_exit": Use this command/key to enter/exit the crane
* /camcr <0-5> or "v": Use this command/key to switch camera modes(HELPS ALOT)
* /magnet: Use this command to release containers that remain attached to the magnet after loading.
* /cranesoud: Use this command to toggle on/off the crane sound.
* /craneset: Use this command to change crane default key binds.
Show content
* /prefercrane <1-2>: Use this command to choose which crane mission you wish to start with(This feature is locked to L2+)
VIDEO TUTORIAL:

Navigation

[0] Message Index