CIT Forum Index

Support => Tutorials and Guides => Job Guides => Topic started by: Sawos on 22 08, 2023, 11:22:33 pm

Title: Civilian: Crane Operator
Post by: Sawos on 22 08, 2023, 11:22:33 pm

Crane Operator job guide

(https://i.imgur.com/H3jt3tN.png)

Step 1: Location and Introduction

Head to Easter Basin Harbor in San Fierro.
Show content
(https://i.imgur.com/iw14RTd.png)
Understand that as a Crane Operator, your role involves moving, lifting, and positioning goods using a crane's electromagnet.

Step 2: Crane Selection
there are two cranes available for the job:

Crane 1 is situated in the South West.
Crane 2 is located in the North East next to an anchored ship.
Show content
(https://i.imgur.com/yHatS0L.png)

Step 3: Crane 1 Operations
Option A: Crane 1 - Load Mission

Take on a loading mission assigned to you.
Lift containers near the warehouse using Crane 1 and place them onto the Big Ship (Freighter).
Complete the mission by positioning containers in 5 designated zones on the ship.
Receive payment for each successfully loaded container.

Option B: Crane 1 - Unload Mission

Accept an unloading mission for Crane 1.
Use Crane 1 to carefully move containers from the Big Ship to specific boxes on the ground.
Identify the boxes with a truck blip on the radar/map, categorized by Red, Yellow, and Blue colors.

Step 4: Crane 2 Operations

Option A: Crane 2 - Load Mission

Wait until the Cargo Ship is ready and docked in the basin.
Perform a similar loading task as Crane 1, but now with 7 designated zones on the ship.

Option B: Crane 2 - Unload Mission

Choose the unloading mission for Crane 2 after the Cargo Ship has docked.
Execute the same unloading process as the Crane 1 unload mission.

Step 5: Crane Operating Instructions

When entering the crane, you'll find a control panel with operating instructions.
Show content
(https://i.imgur.com/57R6wVR.png)
Remember to use the command "/magnet" if the container remains attached to the ship's magnet after successful loading.
Keep an eye on the magnet load detector, located on the right side of your screen below the timer. It confirms if a container is ready for delivery.
Keep an eye on the magnet load detector, located on the right side of your screen below the timer. It confirms if a container is ready for delivery.

Step 6: Ground Detection

Beneath the load detector, find the ground detection indicator.
Monitor whether the attached container has touched the ground or not.

Job Ranks:
         L0. Crane Trainee
         L1. Trained Operator - Req: 40
         L2. Class C Operator - Req: 100
         L3. Class B Operator - Req: 180
         L4. Class A Operator - Req: 250
         L5. Specialized Heavy Lifter - Req: 360
         L6. Crane Foreman - Req: 500
         L7. Slinger - Req: 800
         L8. Supervisor - Req: 1000
         L9. Site Manager - Req: 2000
         L10. The Crane - Req: 5000

Q: Are there commands to customize job settings?
A: Absolutely. There are commands available to modify certain settings for the Crane Operator job:

/crane or "enter_exit": Use this command/key to enter/exit the crane
/camcr <0-5> or "v": Use this command/key to switch camera modes(HELPS ALOT)
/magnet: Use this command to release containers that remain attached to the magnet after loading.
/cranesoud: Use this command to toggle on/off the crane sound.
/craneset: Use this command to change crane default key binds.
Show content
(https://i.imgur.com/B1qwhGE.png)
/prefercrane <1-2>: Use this command to choose which crane mission you wish to start with(This feature is locked to L2+)

VIDEO TUTORIAL:

https://youtu.be/DMfTVwE2ysA